With thanks to the helpful folks in finding the old post on the canoe stand, I modified it a little to fit my needs. I’m certainly no Tom Dodd with a Skil Saw, but it went together!!! I had been storing a Mad River Explorer on the floor as there is no usable wall space and hanging from the ceiling was out due to the garage door. With a range of 10’6” to 16’6” I was able to do without the “prow” version of the uprights, and by using a bolt on method, I can use add slanted uprights down the road if needed. The upper cross-bar slips over the uprights and flip-up stops provided a little protection for anything sliding off. I am in the process of gluing up some additional “slip-overs” that will have webbing, allowing for canoe movement done in the original design. Plenty of storage below for related gear in tubs. I had the wheels and plywood laying around, otherwise I would have made it a little lower. Many thanks to the original designer!!!