little helper for loading the canoe.

[kahel]

I saw the video here on YouTube and thought to myself: I need something like that!

So I took some screenshots from the video and then I rebuilt the cart.

.


. .

after welding the frame it look like this - but how to fix the Wheel axle?! mhmmm .... screw-clamps!

. .

. .

.

.

.

still a little paint on it and the little scales is ready.
This will help me a lot to put my canoe from backwards to the roof of my car.

regard
Michael

 

[Boatman53]

Do you think it could be used for more then that little bit for loading the canoe? I guess it would need to be bolted on somehow for more rugged use.
Nice job though.
Jim

 

[kahel]

Do you think it could be used for more then that little bit for loading the canoe?

maybe yes.

I guess it would need to be bolted on somehow for more rugged use.

it will be bolted from the other side with srcews an some plastik washers ... please have a closer look to the pictures an you will see how it works.

.



regards
Michael

 

[joebh]

I’m selling a 4 wheel cart with my Swift Keewaydin 17 canoe that performs a similar function

 

[Boatman53]

I did see those bolts but it is on the tapered gunnel and pulling forces want to slide to off. I’m thinking something that engages the deck (even a bungee cord) would help keep it in place.
Jim
I took another look at your setup and you have a cross bar right by the hand grip. A Velcro strap would do nicely.

 

[joebh]

Canoe Cart 4 Wheel Dolly to Transport Canoe with Four Wheels which allows flipping the canoe for easy loading on vehicle upside down is what I just posted a photo of

 

[Boatman53]

I understand that Joe. Maybe someone will be interested, but Michael lives in Germany and my suggestion was to maybe help him make what he is building more useful. Not taking away from your 4 wheel version.
Jim

 

[kahel]

well done

 

[Boatman53]

Well done indeed. Those end caps are a nice touch.
Jim

 

[jdeerfoot]

Very professional looking - nice job.

 

[kahel]

@jim

here on the pictures you can see how I have solved the clamping.
There are two PE rails that clamp tunder he gunnel.

. .

.

. . .

. .

 

[Boatman53]

That should work nicely, again well done. Great satisfaction in making ones own gear.
Jim

 

[kahel]

and here are some pictures of using the trolley ... "easy going" by one person.

put on the trolley
.

.

preparing the car (temporarily attach wooden slats for better sliding, and a blanket for the protection of the car)
.



Roll the boat to the car and put it on the roof.
. .

.

.

ready to go.

 

[Dale]

I put something similar together and, unlike most of my initial efforts at something like this, it works like a charm. Thanks for the inspiration Michael!

 

[kahel]

it works like a charm

Yes, it does!

I'm always enthusiastic about it too. I love this little helper. Even if it can only be used for a brief moment - but that's exactly what it is.

 

[Dale]

And here’s the total setup for loading a 60 # Raven alone - a solid steel bar with one end inside the Thule bar and the other inside a hollow aluminum extension, all gorilla taped together and supported by a 1” hardwood dowel. Not pretty but it works and is much cheaper than similar manufactured setups.

 

[kahel]

that's also a charming idea, putting the canoe on the roof of the car.

regards
Michael