• Happy 1st Issue of Playboy Magazine (1953)! 🐰

Aviron Clement paddles

Joined
Nov 25, 2021
Messages
950
Reaction score
894
Location
Florida
Can y’all shed some light on these paddles? I have 3 - 60, 58, and the third is much shorter and I don’t remember the length. It’s at my in-laws’ home.

They’re pretty light, but very thick shafts. Are these white water or just recreational?

85F4276E-089B-414A-9D20-733978EA2083.jpeg8526F712-289B-416C-A6B3-F1B709A197FB.jpegCE17E9AF-43D5-43A6-B9FD-355772954107.jpeg
 
Last edited:
Clements were historical Canadian paddles, once used by Everyman and Superman.


. . . canoeing legend Bill Mason, widely recognized as the grandfather of modern canoeing. During the 70’s and 80’s the Canadian canoeing icon produced a series of instructional books and videos (Path of the Paddle, Song of the Paddle) that have since become bibles of the sport.

. . . . Mason used a rotating cast of Clements . . . .
 
I have one, the shaft is oversized because it is softwood. It was the standard tripping paddle for many of us "way back when". My mentor was so attached to his that he had multiple layers of fiberglass on the blade, the thing was a battle axe by the end.
 
These need some tip work. Either soaking in oil or sanding to wood and recoating with varnish.
 
One of the three has an excessively worn tip; it’s delaminating. It may be a candidate for some more aggressive rework, like taking the width down some as well as fixing the tip.
 
Are these white water or just recreational?

To get back to this original OP question, my guess is that it was probably intended for whitewater, given that it is laminated for strength, has a reinforced tip, and seems wider than Mason's soft wood flat water Clement.
 
If they’re not particularly well loved or collectible, I shouldn’t feel bad about slimming the blade up and carving on the grip some, and scraping the varnish off the grip and shaft.
 
Here’s a thread I made showing how I altered my 58” Clement. It’s now my favorite when I can’t use my Bruce Smith.

 
I just inherited this rotator cuff shredder. Apparently 2212 means 22 inches by 12 inches blade size. Both paddles are 56" long.
Nice paddle. I recently mentioned in the thread about the Maine guide Paddle that they are a paddle that will do more than a standard paddle. I not saying that it is a Maine Guide Paddle but it will do more then a standard one.
 
Back
Top Bottom