• Happy Lips Appreciation Day! 👄💋💄

New Swift Prospector 15 Solo - Specs?

My idea of a linebacker solo:
15'6"-16'6"-ish length.
2" front rocker, symmetrical or 1.5" rear.
28/29" gunwale width
30-32" max width
29" width 3" waterline
10"+ seat gap to floor
19"/14"/16" shear, bring it all up an inch if the shoulder needs lifted to get the seat high enough.
280-290# 3" waterline

 

Maybe I'm crazy (and definitely ignorant) but what needs to happen to get the weight specs up? Are my wish-list specs too optimistic? Where are these optimum weight rating coming from? Yes, the answer is displacement. But how can we optimize that displacement to produce a good hull? (Uh-oh, I think I see where the draw to build your own starts to take root. . .;) )

Take the Rockstar from Redfeather: 320# top optimum? That's not a big boy tripper, that's a day boat.

1773672737685.png

Compared to the Swift P15 Solo:
1773673307501.png

I think that's why I'm frustrated with the Swift P15 Solo: The specs looked SO good. And then it fit like a NW solo or a Phoenix. Maybe it really is just the seat position, maybe getting it up to the shear will bring all the benefits and not result in a turtle-prone experience. Maybe a do-all solo tripper for a tall 350-400# optimum load is just too fine a hair to split with all of the other options out there. Maybe I just whine a lot. . .:p

I'm going to email Swift and ask if they will hang a seat from the gunwale. I know some manufactures with heavy tumblehome/shoulders won't because of the high bend stress involved.
 
I would guess that "optimum load range" is one of those specs that needs to be taken with a grain of salt and I can certainly see how it would muddy the waters.

Here are the specs on the Raven. Maybe @memaquay could chime in as to how it performed at different loads and paddling conditions to help with frame of reference.

1773675885339.png
 
I'm going to email Swift and ask if they will hang a seat from the gunwale.
We ordered our P13 with wood drops for kneeling that hung from the Carbon/Kevlar gunnels. No pods. We specified the clearance from the bottom of the canoe to the bottom of the seat and they cut the drops accordingly. Did a nice job of forming the drops to the gunnels. With the additional mid-height on the P15 you should be able to get the clearance you're wanting. One thing to add is that our individual weights are under 150 lbs so there may be other considerations.

Swift seat drop-1 web.jpgProspector 13 kneeling seat and no float tanks-crop.jpg
 
Last edited:
I like the way Clipper gives weight limits.


Take note of the 10" freeboard weight listed for the Solitude, which by my reckoning is pretty accurate and I suspect would translate to the Caribou S....

 
I started out in the Osprey, which many people here are familiar with in one incarnation or the other. I ended up carrying chainsaws, gas, large food barrels, plus my own considerable bulk. Once overloaded, The Osprey became a dog in fast water, quite hard to turn. I think it would be pretty hard to overload the Raven. At my heaviest I was 230 lbs, plus chainsaws, canvas tents, tools, etc, probably a total load of around 350 pounds. It retained its agility in big open water and fast water. Plus it's 14 inches deep at the centre. I feel that is the perfect height for a work/solo canoe.

The Caribou has a similar size, but not as much rocker, and it is symmetrical. Those clipper canoes are nicely priced compared to the swifts, but you will not be getting a canoe that weighs in at the same poundage as a sack of groceries.
 
Back
Top Bottom