Latest activity

I'm beginning to think it's not on my end. I tried posting one from my wife's phone last night and got the same bad results.

I'm having the same problem as AL, pic is correct on my phone and iPad, buy comes out like the one I attached.

For anyone that scoffs at Ai this is what it can do. Pretty convincing stuff. There are getting to be a lot of similar posts. Alan

To reduce the risk of a canoe sliding forward in a hard stop I made some "hood" loops that fit under our hatchback door and use a NRS...

Interesting test, Alan. I don't race so the benefits in speed of one type of paddle over another isn't as important to me as having a...

Make that argument to Charlie Wilson, not me. Two sets of gunwale stops properly firmly placed both in front of and behind the widest...

Very cool Alan. I assume you were blindfolded to avoid confirmation bias. ;) I usually cruise kneeling using hit and switch with a 6...

I made mine from leftover 2x4’s, scrap plywood and leftover canvas. I just picked up 2 ash boards and a cherry fot gunnel material.

Not often that you'll hear someone recommend moving to NYS but we still have lots of Forest Preserve land where you can park, launch...

At least you checked Gamma, some people don’t even think to check. I go by the 1-10-100 rule when I’ve got something on the roof or tied...

I put up a rack in my garage with 2x4s and construction screws and it’s currently holding 3 canoes and around 180 lbs without issue. I...

Well, you can do a 15 mile back to back comparison if you'd like but I'll stick with something a bit more manageable in my evenings. :)...

Hi Mike-welcome to the site. I have repaired canoes in much worse condition. Your plan seems reasonable as far as durability. Only you...

Through discussions on this site I eventually wound up getting the TG-G. I like ALMOST everything about it except one thing - it is as...

Just old 2x4 with GRK structural screws holding it together and to the wall.