Search results

I apologize ! It's Gamma's canoe, and he can put paper machay on it, if he wants to ! As for real world results, A puncture through the outer layer, will leave a strip built canoe, in worse shape. If that hull flexes over a rock it will survive. If you rip a hole in the outer layer, the...

Adding the extra layer of cloth to the inside is wrong. Sorry, but I feel the need to express this. Take a look at Alan's Bloodvein pics, after his trip. See how much wear there is to the outside of the hull. Adding extra layers to the inside, only adds stiffness, that could have been...

It's not worth taking the chance, on the mine not contaminating the BWCA. There is No fix, if the BWCA is contaminated. The BWCA is such a gem ! Giving a foreign country, the right to mine, smelt the ore, and sell it to China, is not in the interest of the USA. Praying Minnesota will stop...

Yes. I had the same problem with our Saw Stop. I'm not saying it's a fault of the saw. You just have to be aware of it. The locking nut on the jig needs to be beefer also. Good to hear you are building another canoe! Jim

Sounds like you have it handled. Good luck with the sneaking off part ! Ha ! Jim

It just SUCKS ! Both our Republican Senators, Grasley and Ernst voted for it ! I Sure Hope the State of Minnesota, can put a stop to it ! Jim PS I sent emails to both ,

We have a jig, like yours, at the shop. Yeah I gave it some thought. I've used it to cut strips, for Trivets, at the Nokomis Wood Shop. They were less than 2' in length. Works relatively well, but ours slips, a little. You have to monitor strip thickness. Thicker strips were just reduced on...

looks like the seats were webbed with Snow Shoe cord. Likely 1/2". Jim

Scouts played a big part in my life ! My Dad had passed away, when I was 13. We had a small Troop, My Mom couldn't afford to send me to camp. The Troop leader found the funds, to send me with the Troop. A dept I can never repay ! Jim

My concern with wet epoxy is when you lay out the dry cloth, it might snag the cloth and distort the weave. I guess it would also depend on how many spots you were filling, and where the spots were. Like Alan, I fill voids before the final sand, and then I'm ready for cloth. Fact is, I just...

I use wood glue, instead of epoxy. no need for epoxy, and the wait time involved. You are just filling a hole, not a structural situation. Jim

I'm Old enough to know better, but too Yong to care. Happy Birthday Snapper, and Stripper Guy ! May your Wishes come true, as you blow out the candles ! Jim

The glass should stick to the hull. Glass it all at the same time. Trim your cloth, to about 2" of the hull. Should have no trouble glassing it. Jim

I found the Hogging effect, when I pressure fit the strip joints in the football. I actually had to glue a block to the inside of one hull, to pull the hull into shape. Once I glassed the outside ? It stayed. After that I I removed enough of a strip, so I didn't have to force it into place...

My canoe shop. Before the Nokomis Wood Shop. I've been tilting for about 15 years. Tilting will make sanding that Shouldered Tumblehome, easier too ! Jim

I tilt my strongback, to make it easier to cut the center line, and then fit the strips. Helps in the sanding process too. Jim

Nicely done ! Enjoy ! Jim

Thanks clemency, for the video share ! I've never been to Canoecopia, and this was a good substitute ! Jim

Just a note. I spaced the leading edge, of the seats on all my solos, regardless of the hull length, or symmetry, at 5-6" aft of center. 10" aft of center, seemed too far back, when paddling empty. You can adjust with weight if you need to. Nice thing about Aluminum gunnels ? No finish...

WOW ! Anyone that has ever, or even Dreamt of such a trip ? Owes it to themselves to watch Kevin's Journey ! It's a long one, I watched parts of it at night, before bed. Out of 5 Stars, I give 10 ! Enjoy ! Kevin Wild's 42 day Solo canoe trip Jim