• Happy 1st Wimbledon Championship (1877)! 🎾🥎

Search results

  1. Will Derness

    What to use for an inside ground sheet (and how to use it)?

    I have never used tyvek inside the tent, so I can’t answer your question. My use as a foot print was to have it take the abuse from ground contact rather than the tent floor.
  2. Will Derness

    What to use for an inside ground sheet (and how to use it)?

    Tyvek is made in a light weight version that is used by kite makers. Type 1443R Tyvek. I've used it to make tent foot prints and vestibule ground covers...
  3. Will Derness

    Photo of the day

    Same blackwater creek I paddled yesterday and while there is fog around, it is not hanging low, dense, and mystical like New Years Day. I’m on a roll - I’ve now paddled every day this year.
  4. Will Derness

    Photo of the day

    Morning paddle on New Years Day. Black water creek in NC
  5. Will Derness

    “Need” a new solo!

    Yes, I considered that when I swapped out the aluminum thwart with the wood laminate. I could get a better finger grip on the thwart that way, but would give up looking at the colors on the beveled laminate face. I opted for the canoe looking pretty.
  6. Will Derness

    “Need” a new solo!

    This thread motivated me to make the effort to move the cam cleat. I took some left over thwart scraps, made a block and mounted it.. I’ll need to try it on the water, but it looks like it should work.
  7. Will Derness

    Drip covers?

    You could also consider making a partial front cover, which would cover just the area that collects drips from the paddle. This polygon would approximate a rectangle as it will be near the forward center of the canoe. You could test this concept with some 4 mil plastic and duct tape
  8. Will Derness

    “Need” a new solo!

    The line in the photo is 5/16”. The carbon cam cleat is a Harken model 365 which can accept line from 1/8” to 3/8”. Stronger cam cleats that accept larger line are also available from Harken. https://www.westmarine.com/harken-standard-365-carbo-cam-cleat-367211.html
  9. Will Derness

    Drip covers?

    Cooke gave me excellent directions for installing the nylon cover and drilling the holes. They even sold me a hand rivet gun modified for their snap closures.
  10. Will Derness

    “Need” a new solo!

    Since you're on an outfitting roll here is an idea to consider. Use a Harken cam cleat to restrain the painter closer to you, within reach of your sitting/kneeling position. This allows stepping out of the canoe while the hull is afloat and walking the canoe to the landing. The idea came to...
  11. Will Derness

    Photo of the day

    Growing the sport, one paddler at a time
  12. Will Derness

    Skid plate suggestions

    No, bias cutting isn’t necesssary as the peel ply fabric stays intact regardless of the angle of the cut.
  13. Will Derness

    New Christmas tree ornament: a Chestnut Chum + its restoration

    That looks lovely. White canoes always look elegant to me and with wood especially so.
  14. Will Derness

    Royalex skid plate removal and reapplication

    Good work, I would be inclined to take a coarse tooth steel rasp to remove and shape your excess epoxy, that will be quicker than hand sanding. I have applied 2 cloth layers in one epoxy session, but I had everything laid out ahead for layer 2 - fabric, pre-measured, yet unmixed, epoxy...
  15. Will Derness

    How to unjam a stuck double blade paddle?

    I have unstuck double blades by placing one end of the paddle in the narrow gap between a pickup truck bed and the truck cab. Holding on to the other blade end with the ferrule button pressed in, turn the paddle until you begin get your shaft end to rotate. Rotating one of the shafts will...
  16. Will Derness

    Drip covers?

    After experiencing the wet ride that is double blading I had a bow cover crafted that would catch most of the drip and direct it off to either side. It has significantly reduced the volume of water the canoe was collecting. Seeing Mr. McCrea's cover for his Penobscot was my inspiration...
  17. Will Derness

    Tilley Hats

    Yes, you won’t be mistaken for Harrison Ford wearing this, but it does keep the sun off you
  18. Will Derness

    Tilley Hats

    In searching for a new hat this year I saw Sundays Afternoons had a new item in its lineup. The features that attracted me was the foldable brim and sunglasses holder. It’s become my favorite, very functional on the water and folds down to the size of a book...
  19. Will Derness

    I'm throwing in the towel

    I've never used a towel in my decades of paddling, it has always been a sponge. However this thread got me interested enough to buy a ShamWow and it got a field test today. Spread out on the cockpit floor, it did a remarkable job absorbing stray water, far more efficient at that task than the...
  20. Will Derness

    Royalex skid plate removal and reapplication

    My, my, my, you have a project. This looks very similar to a royalex canoe I restored that was used extensively in Class II and III water. It had failing kevlar felt skid plates and when I tore, cut, rasped away the kevlar plates it looked like this. The canoe was repaired and dynel skid...
Back
Top