• The 2026-29 Fund Drive needs 15 MORE DONATIONS to reach target. Read the Featured Thread for details. Please donate!!!

Search results

  1. Cruiser

    18 foot Freedom 17 build

    Since we are swapping stretch stories ... last 2 builds were stretch versions of a Swift 14' Keywadin pack, first one was 15' and was fine with no bad habits, the last one was a 17' version and it also had zero bad habits and is exactly what I hoped it would be. I will be very surprised if...
  2. Cruiser

    18 foot Freedom 17 build

    The Freedom 17 was my 3rd build. still have the boat for camping with my better half. The hull is very stable and surprising fast, lots of room as you mentioned and pretty nimble on the water.
  3. Cruiser

    18 foot Freedom 17 build

    Ditto, new builds are always fun
  4. Cruiser

    Long time lurker, finally getting started

    IMO, you should be fine with 1/8" strips and no steam .... when you get the form made up, just try a single strip first and see how it takes the bend. Suggestions: - don't just bend the wood, as you start the bend, go slowly and let the wood take the bend, as you apply pressure you can "feel"...
  5. Cruiser

    Long time lurker, finally getting started

    Somewhat of a dissenting opinion on TB III, it really isn't recommended for stressed layups, as I understand it. Both epoxy and TB III are rated for waterproof and are of comparable strength, but the TB III doesn't get hard, it stays flexible for a long time after setup and allows some material...
  6. Cruiser

    Long time lurker, finally getting started

    Welcome to the madness 1) I think you have hit 3 good boats, given the description of "how" you intend to use them. Since you likely won't be able to try any of these, reviews and description will have to guide what you select. Reality is that if you stick with the main stream designs like...
  7. Cruiser

    Lightweight Lining Ropes

    Yup, nylon does absorb water and it stretches when it does ... not necessarily a deal breaker, depends on the application
  8. Cruiser

    Lightweight Lining Ropes

    I am surprised that there hasn't been a single mention of Amsteel (Dyneema), it floats and is arguably the lightest, strongest rope you can get. You can get it in a range of sizes, something like the 7/64" is the most common choice. I use it extensively for my hammocks and various camp rigging...
  9. Cruiser

    Questions and requests for advice as I'm starting out

    Jim, if you are looking at the open spot on that last pic, it seems to be under the cloth. Maybe an area that didn't get filled prior to glassing. John, you may want to check that area to be sure it is cover with glass and not open to the strips. Brian
  10. Cruiser

    Questions and requests for advice as I'm starting out

    just go ahead and varnish, it isn't a big deal, you aren't actually in the fiberglass yet from the photos, just near the surface. Visually the varnish will make that all disappear IMO. If you do another boat, realize that FG is the very last step ... getting the boat faired is done before you...
  11. Cruiser

    One Armed Canoe Paddle?

    The paddle batch I made in 2024 (and posted here) has a "sculling" one handed paddle for a friend in Louisiana. We went back and forth a bit until I had a good idea of the how and why, including some rough drawing he made https://www.canoetripping.net/threads/new-batch-of-paddles-for-2024.128938/
  12. Cruiser

    First Canoe

    I found that using the stemless method created some gaps and such as well, I ended up just doing my best and cleaned it up at the end. There were a few gaps, a few tears and I ended up waiting till the end when I usually go around fixing imperfections, for the stemless areas I just filled...
  13. Cruiser

    How do you inflate your air mattress?

    Concur, the snozzle is very good at inflation, have used them for a long time. The issue come when it's time to deflate, getting all the air on the trail can be a pita. The Flextail can suck the mattress flat fast and packing is a lot easier IMO. Having said that, I mostly hammock now so it is...
  14. Cruiser

    How do you inflate your air mattress?

    Maybe specific to your mattress ... works find for deflation with both my expeds, one downmat and a much newer one.
  15. Cruiser

    How do you inflate your air mattress?

    Since this was originally posted, I purchased a FlexTail Max 3 pump to replace my bag pump. I am using it on Exped mattresses when I camp with the misses. It comes with quite a few adapters, but I never thought to check for 3D adapter options, may check that out. It does inflate quickly, but...
  16. Cruiser

    First Canoe

    The post was more about using a glues properties to your own advantage and that for softwood like cedar almost any glue is going to be overkill from a strength perspective. I have TB, TB II, TB III, LePages Pro, LePages Express and two different epoxies ,,, they get used to make building easier...
  17. Cruiser

    First Canoe

    I could post new picks or just re use what I posted 2 builds ago, if you go down 15 pics in this post, there are pics of glue in the coves, squeeze out and clamping: https://www.canoetripping.net/threads/light-weight-solo-tripper-build.105054/post-105920 At the end of this post are some...
  18. Cruiser

    First Canoe

    Personally, I run the inside glass close to the V and call it a day. The whole area is sealed with epoxy anyway so it is waterproof, the outside is usually wrapped in glass. When you consider the forces the area will experience, there really isn't any reason IMO, to worry about the inner glass...
  19. Cruiser

    First Canoe

    I would worry that the thickening agent might cloud the epoxy, so I guess this would have to be consideration for impact on the final product. Are your seal coats thin enough to be safely ignored or is there an impact? Brian
  20. Cruiser

    First Canoe

    In the last build, I used a seal coat and actually took several weights and determined that the seal coat resulted in a ~1 pound reduction per side versus what a wet layup would use. That is significant iMO After doing the first 7 boats with a wet layup, I would suggest that using the seal...
Back
Top Bottom