Jim Dodd's latest activity

Well, this canoe is finally wrapped up. Turns out I don't really have the desire to build canoes anymore. It sat untouched for a long...

It's 13' long with a 32.5" beam. Symmetrical hull with a bit of rocker. The hull was made from cottonwood. The trim is all walnut...

Carbon is hard to see, if it wetted out fully, during infusion. I'd contact the manufacturer, and see if they would at least repair...

I used aluminum gunnels on my composites. The Bell type. Great gunnels, but they are stiff, as they should be. This is not a complaint...

I laminated the two cedar strips for the inside and put them on together. I was hesitant to glue all three as I didn't know how easily...

Looks nice. On my first build, I widened the hull, very similar to this ! I found I struggled to hold a straight line of travel, untill...

This thing has had a bit of a workout now so I thought I'd give one final update. I used 3/16" strips with 6oz E-glass on the outer...

tketcham has it right. Heel is one factor but equally important is pitch. Canoes steer, primarily from the stern. Pitching the bow down...

Well it is not working. I am trying to figure out stem shape and and forward quarter bilge turn and there is a whole discussion I...

I am building what I call a Wasioto Whitehall. Whitehalls were the ubiquitous water taxi and delivery boats in Boston and NY harbors...

Well as the seasons change here I haven't had a lot of time for the boat. Just a little bit here and there. I got out for one last...

I used my oscillating tool to cut the channel as well as a sharp chisel then a file to clean it up. I then laminated in some tapered...

Hi Jim, farmplasticsupply has a 17x10 piece of the blue boat shrinkwrap for 15 bucks, 20x10 for 18.

Following. Made me think of this thread and this build: Composite build

I picked up this stove in a barn clean-out a couple of days ago. It seems in ok shape everything moves as it should. It was last used on...