MyKneesHurt

"Tent Life in Siberia", George Kennan, 1870. Consistently delightful 100 pages in.

Thanks to all, I will continue to mess with it and see how she handles in increasingly adverse conditions. I have a fondness for little...

That was my first thought too but when I looked at the pictures I thought it looked like the seats were bolted directly to the gunwales...

New kevlar hulls are bright yellow. Broad sides, such on C4 canoes tend to flex slightly in and out, even when new. From my usual...

A woodstrip boatbuilder I know installs thwarts and seats attached with a stress from one side to the other. When I removed the six...

I'm not familiar with that hull but kevlar is not known for being the most rigid material and it's not uncommon for a kevlar hull to...

One thing you could try is adding a couple of thwarts. Lots of tandems would have 2 more than your boat, one just behind the front seat...

Hello all, I recently bought this little boat and, now that I've got new handholds and center thwart in it, I put it on the water in our...

There is a learning curve with hammocks but they can be enjoyable and offer great sleep and convenience. Plenty of good advice in this...

The inside of the hull resembles this. https://www.facebook.com/share/1Csrm2hs9P/

It's an Adirondack Algonquin. I'll see myself out.

https://www.canoetripping.net/threads/the-adirondak-rebuild-almost-done.81930/ Here's a fellow member with the same logo on his (much...

The official Coast Guard site at https://uscgboating.org/content/manufacturers-identification-detail.php?id=11548 shows that Scott's...

@Benson Gray HIN search reports that it's made by Scotts Custom Boats in Arizona...which seems to be a powerboat accessory company...

^ SCS63462H888 I couldn't find SCS, but the 888 is a good bet for a date of manufacture, thank you. What site/resource are you using to...