• The 2026 Fund Drive is now ON. Read the Featured Thread for details. Please contribute.
E
Reaction score
60

Latest activity Postings About

    • E
      ErAh replied to the thread Make a Lamoille lighter.
      I use 10mm PVC foam (60kg/m3), and if I don't make ribs, I will use vacuum bagging to get air out. Of course I can use vacuum bagging...
    • E
      ErAh reacted to stripperguy's post in the thread Make a Lamoille lighter with Like Like.
      I’ve done it both ways, football foam only and football with ribs. For my usage, the ribs are overkill. There’s plenty of added...
    • E
      ErAh reacted to Alan Gage's post in the thread Make a Lamoille lighter with Like Like.
      I've only made one boat with a foam core and I also wondered if I should do foam ribs or not. My boat was relatively small and would not...
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      Today I get canoe out of plug, in the beginning it feels like this won't ever come out, but I take it slowly and use almost 1,5 hours to...
      • 1000013131.jpg
      • 1000013149.jpg
    • E
      ErAh reacted to Alan Gage's post in the thread Make a Lamoille lighter with Like Like.
      It looks very good so far. I am always disappointed with how much resin it takes for carbon and Kevlar if not infused or vacuum bagged...
    • E
      ErAh reacted to Alan Gage's post in the thread Make a Lamoille lighter with Like Like.
      Yes, that was my experience as well. I also had difficulty removing the excess resin that would get trapped in the bottom layer without...
    • E
      ErAh reacted to Gamma1214's post in the thread Make a Lamoille lighter with Like Like.
      It looks a lot like mine. Like Alan, I feel a little better knowing that I'm not the only one. Looking good to me but I'm not ready to...
    • E
      ErAh reacted to dutchlennart's post in the thread Make a Lamoille lighter with Like Like.
      Looking forward to the results. For a big boat like the lamoille and a homebuild getting a hull onder 10 kg is great to me. better a...
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      The hull will get more weight, when I add core foam and inner carbon layer, if this is under 14 kilos without trim I am happy. Or not...
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      I laminate both layers in same time, and it was not as easy as in my two sample laminatings what I made earlier. Smaller part were easy...
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      It was long wait to get carbon fibres fron Germany to Finland. I don't find 150 cm wide carbon fabric from my local shop, so I must...
      • 1000013092.jpg
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      Maybe I will add glass layer in stern and bow, just for skidplate. As I know one finnish kayak repair shop, they use only glass when...
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      I have Nelo Inuk kayak in E layup, its honeycomb structure, carbon in outside. And with it I have made some hard landings as you are...
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      I made a second trial lamination, I use infusion epoxy in this trial, and it seems to be better in my workshops temperature. Its only 15...
    • E
      ErAh replied to the thread Make a Lamoille lighter.
      In FInland open canoes are not as popular than kayaks. I have used both, but in the last 2-3 years I have paddled mainly with canoes. In...
  • Loading…
  • Loading…
Back
Top Bottom