Search results

I use 10mm PVC foam (60kg/m3), and if I don't make ribs, I will use vacuum bagging to get air out. Of course I can use vacuum bagging with ribs, but this whole canoe thing is new for me and now I feel like I like to get it ready as easy as I can.

Today I get canoe out of plug, in the beginning it feels like this won't ever come out, but I take it slowly and use almost 1,5 hours to get it out. I should put 4,5mm plywood strip between plug and canoe to get canoe out. I must look carefully what I do to avoid destroy canoe, but all went...

The hull will get more weight, when I add core foam and inner carbon layer, if this is under 14 kilos without trim I am happy. Or not exactly happy, but it wont be any lighter. Everything under 20 kilos when this is ready will be good enough. Now I am thinking that I should make a female mold...

I laminate both layers in same time, and it was not as easy as in my two sample laminatings what I made earlier. Smaller part were easy to do, but canoe was much much harder. It takes too long to squeeze resin in to laminate and get all air out. Tomorrow I will give some heat for canoe maybe...

It was long wait to get carbon fibres fron Germany to Finland. I don't find 150 cm wide carbon fabric from my local shop, so I must order them from Germany. Today I laminate 2 layers over the plug and it was much more difficult and time consuming, than I expect. Now I should wait long enough to...

Maybe I will add glass layer in stern and bow, just for skidplate. As I know one finnish kayak repair shop, they use only glass when they repair kayaks, even kayaks can be with kevlar or carbon structured.

I have Nelo Inuk kayak in E layup, its honeycomb structure, carbon in outside. And with it I have made some hard landings as you are forced to do in the sea sometimes, there comes hits but they are quite easy to repair. Actually, I really dont want kevlar in the outside, if you get hits for it...

I made a second trial lamination, I use infusion epoxy in this trial, and it seems to be better in my workshops temperature. Its only 15 celcius and usually resins need around 20 celcius. Normal epoxy resin for hand lamination will be too thick in this case and with infusion resin its much...

In FInland open canoes are not as popular than kayaks. I have used both, but in the last 2-3 years I have paddled mainly with canoes. In our paddling club our members use almost only kayaks. But the other side is that outfitters in Finnish lakeland rents canoes at least as much as kayaks. But...

Maybe I should put some pictures, which I take in that trip. My wife interviewed the best finnish nature photographer for this article Jorma Luhta (my opinion). It was quite difficult to make it with my photos : , my photos are cheap, Jormas are not and publisher dont want pay the bill) ...

Wife wrotes around 40 articles per year for magazines, so almost all of our trips will be published. In Finland biggest player of wilderness magazines is "Erä-lehti". In july, I get my first magazine cover image in Erä-lehti and this was big deal for me... (I make my first subscribe for...

I use Miracle Gloss MG681 mold release compound. I have already one gallon can. If I use Lamoille as a male mold, I would use window film in diamond area, because its so flat in Lamoille, its possible that it would be hard to remove copy from mold. My plan is laminate with closed stem, but I...

Thanks Alan, for me you message means that I should make a female mold :) . Actually I have 10 kg vinylester tooling gelcoat and 20 kg vinylester tooling resin in my man cave. My first plan to make Lamoille copy was make a female mold, but as I know these infusion problems with skisleds (170cm...

Hi, I am new in this forum, but I like to ask some advices to my next project. But first something about me (as I think that this site administarator like to know who we are), I am around 50 years old man from southern Finland and I begin canoeing in 1989. Today I have three canoes in my shed...