G
Guest
Guest
While I may be susceptible to criticism or ridicule on many fronts, now having seen the sclerotically scabrous, lepidote and furfuraceous remains of two axe heads, two Cara Cara knives, a machete and a hammer in Maryland, I don't want to hear a peep from the Old Line State about my maintenance practices for my modest collection of tools. Not a peep, thank you.
Just for you Glenn, another resurrection. An old rusty machete, complete with a dirt and mud dauber encrusted leather scabbard and a cracked and duct taped handle.

I cleaned up the scabbard, although it took some 0000 steel wool to remove the years of crud and multiple coats of Neats Foot oil to bring back the leather. Which is in surprisingly good shape. That is one helluva well made scabbard; thick full leather, well stitched with oddly starred grommets at the stress points.
I got the duct tape goo off the handle and repaired it with G/flex, and polished and sharpened the blade.

Not too shabby. The cleaned up blade revealed a logo of a crown with arm and axe rampant, stamped LEGITIMUS COLLINS, followed by, um, something gabled & worn off and “Columbia”.
A little Googling brought up some interesting hits. Collins machetes seem to hold a good rep, and given the apparent age, construction and condition this one may be WWII or a post war civilian aftermarket.
http://www.bladeforums.com/forums/showthread.php/842114-Legitimus-amp-Collins-Machete
What the hell, in for a penny. I wet sanded the blade with 600 and 1500 and put an edge on it with the Lansky stone.

Now I has a machete. It’s a big one, 22 inch blade, 27 ½ overall. I’m ready, come zombie apocalypse, harvesting sugar cane or joining the WWII era Signal Corp.