Search results

The good news is that I believe the difference between something like the Magic and an Advantage is relatively small while the jump up to a racing C1 is huge. I have paddled the Wenonah Whisper (billed as the little sister to the Advantage) and I thought it felt pretty 'normal'. Granted, that...

Normally I would day to completely forget about tandem but you seem to be realistic about the types of water you'll be paddling and what you want to do with your occasional tandem partner. Most of us here would much rather have a dedicated solo canoe because it would be so much more versatile...

Somewhere I have before and after closeup pictures of one of my stems that had bigger gaps than Cletus's smile and you really can't tell at all after filling with thickened epoxy and shaping. I don't have the time to dig for them now, maybe later.

I think very few Advantage owners are actually tripping out of them. Not that it can't, and isn't, done but I don't think it's most people's first choice. I would also guess most Advantage paddlers are skipping the wind and rough water whenever possible. I have no first hand experience with...

You do what you gotta do to in order to make it make sense in your own head but it seems to me you are going about this about the hardest way possible. Lay the first strip and let it run long. Use a pull saw, with the beveled stem as a guide, and cut the angle on the end of the first strip...

I set my seat and foot bar for good conditions and try to have enough knee bend that if the seat needs to be slid back I have some room to play with. It's not ideal but good enough for what will hopefully be a short stretch. If I'm tripping it's usually easy enough to shove the pack that's right...

My boats are strip or composite. I'll wetfoot much of the time but won't hesitate to side saddle up to a rocky shore so I can step onto the rocks. I sometimes load/unload with the hull perpendicular to the water. I lift the bow and drag it into shore/ rocks as far as I can before the belly or...

You need to slit the cloth pretty far up the curve of the stem ( as it sits upside down) to get the cloth to wrap around without pulling.

Yes, because of the surfski. We try and keep things canoe specific. I know that @Neophyte posted one in his picture too but it was a bit more chaste with the kayak only peaking shyly from behind the canoe. Yours was a little too flagrant. All in good fun. :)

Gotta be careful doing that. I have a hull that's going on 12 years that way. Once out of the shop is hard for me to bring them back in. Alan

I use the @Mason method. Or, if there is a suitable height stump or rock I will set the pack on it before trying to put an arm through. With the right height rock you can just back right into it. Alan

Looking great! Some people varnish the exterior before removing it from the forms but I never have patience for that. I flip it the day after full coats and let the resin fully cure while I work on the inside

Best of luck with the build when you get to it. Can't wait to see it come together and hear how it performs. Sounds like you've put a lot of thought into getting what you want. Alan

I still have it and it's probably my favorite boat for day paddles on flat water. The low sheer makes switches very easy and relaxed. It just wasn't as fast as I was looking for at the time. It's slightly quicker than hulls like the Magic but just marginally. Not something I'd want to paddle...

That was one of my favorite positions too. I hade a great race there one year when I brought my Magic to combine the race and a weekend camping trip. Another guy showed up in a DY Special and we went neck and neck the whole race. It was a windy day and in the calm water I would pull ahead but...

I've done that one a couple times. Fun course and it was always a great group of paddlers. Good luck! Alan

Interesting boat and sounds like a fun project. I'll be interested to see it come to fruition. Are you thinking strip or composite build? A few years back I embarked on a similar project. I wanted something to bridge the gap in terms of stability and speed between a fast recreational hull...

My CCS Lean has a similar overhang that can be set at any pitch. In nice weather I'll set it high just for extra shade and head room. At night, or if I'm expecting rain, I always lower it and I agree with AI about pitching one side higher than the other, otherwise rain will tend to pool up in...

I would think removing them and replacing them with vinyl or wood gunwales would be the best option. Your dents might improve once the kinked gunwales are removed. I think you can still by knock down wood gunwales online to lower shipping. Or you could rip your own from lumber. Replacement vinyl...

I have no personal experience with tuff stuff but was impressed and entertained by this video when it came out