Search results

In another thread, I mentioned that not much changes between my visits to favorites spots in the ADK's. yknpdlr noted: So not to clutter that other thread with so much drift, I'll carry on here... During that Derecho, one of my former employees was camped at Huntley Pond In July of 1995, her...

While I’m not that fond of High Rock on the Oz, there’s a plethora of ADK spots that speak to me and I revisit them now and then. I think that’s my favorite thing about the ADK’s and wilderness in general. I can visit the same spots decades apart and nothing changes. Maybe a few trees topple, or...

Welcome, Rob I’ll echo the call for pics of those boats that you build. As you probably already know, there’s a large contingent of builders here, looking forward to see your stuff.

Once my shoulder is fully healed from a replacement joint, I’ll be back paddling my solo and maybe tandem canoes. I’ll use a single blade. I’ll likely not paddle a kayak again, mostly since it doesn’t fit the small water, beaver dam and deadfall strewn streams that I prefer. I can clear a 3 ft...

Any stressed skin composite MUST have skin on both sides... The core need only not fail in shear, and of course adhere well to the skins. I've mentioned this many, many times before---the strength of a hull, assuming geomtries and materials are the same, is a function of the core thickness...

Haha, I hoped everyone would enjoy a peek at that oops! There was a little over 30" of fresh in that rolling meadow, with a section of it firmly windpacked. You couldn't discern the windpacked from the light powder by sight, only by feel. BTW, I was a slow learner, as I tumbled twice as I plowed...

Aslowhand, Wow, I'm jealous. I'm assuming your in the Swiss Alps? And above tree line, nice. Here in NYS, my favorite BC ski spot might get 8 or 10 ft all season. Every once in a while, we get 3 or 4 ft over the course of a few days. Here I am at a little hill in MA that we can car shuttle...

Looks great!! Did you weigh it yet? I always find it interesting to see how much weight is removed when sanding. Now it's time for everybody's favorite part...sanding the inside! I use an old pair of ski goggles along with a really good dust mask. Not knowing your typical weather, will there be...

Really hard to say…started officially with 1/2 of a Sportspal split with my father, more for him than me. Started building when I was 22 years old, one every few years or sometimes 2 or 3 in a calendar year. Over 30 in total, but currently 2 in the garage, 4 in the 48 ft trailer, one under the...

I usually cut my stem strips about 4 inches wide, with the weave at a 45 degree angle (bias cut). This way, the stem pieces can easily conform to the compound curves at the bow and stern stems. Also, since the glass fibers are at the 45 degree angle, they tend to NOT pull out or fray, the way...

Glassing today?? Looks to me like “glassed” today. From where I sit, it looks like a great job!

That looks egg salad!! Glassing tomorrow? Do you have help? Be sure to knock down any dust burrs before you drape your cloth. And have you bias cut strips at the ready for the stems…

Whoa!! Hang on to that CJ, those Silver Anniversary models are extremely valuable. My highly modified CJ5 is worthless as an investment, but I’ll never part with it. It took me decades to build it just as I wanted. When my son was 15 years old, we rebuilt a 1984 Scrambler from dust. It’s been 18...

I’ve generally applied my RAKA seal coat on one day, then draped the cloth and wet out the next day. I’ve done some builds where that sequence was three days, that is, seal coat, drape, wet out, one step each day. My nephew’s hull was built that way, it’s been 9 years and it still shows no signs...

Depending on the snow conditions, I think I’ll snowshoe in the ADK’s or my backyard. Same for XC skiing, at home we’re surrounding by the Albany Pine Bush. If there’s good natural snow, my absolute favorite activity is BC skiing, skin up, ski down, no tracks, no trails, preferably. If the snow...

I just chose 2-3 miles, but only because that was the closest choice to zero. I don't paddle solo in a tandem...ever. Ever since I built my first solo boat, I only paddle solo when alone or when the group has an odd number of paddlers. (or is that a number of odd paddlers?) If in a group, and...

FWIW, I always apply a seal coat It really helps to keep from starving the cloth when wetting out.

Anticipating That “scary” lamination step is the reason why many would be builders never take the first step. Glassing is not all that difficult, especially with modern epoxy resins…plenty of time to work with and great adhesion. If you’re really getting the heebies about this, make up a test...

Wow, cool story and glad it wasn’t me!! And I’m sure that those waders were easily cleansed of any soiling. Fascinating to think that the herd made a decision as to which group to shoo away…

First things first. Really nice job stripping, it looks great!! Stems look good too, nice recovery. Like Jim, I too like to cap my sheer line. Gunnels can be nearly any material, just cut a deep groove…I prefer to use epoxy only, no screws. I once used southern yellow pine for gunnels, they...