Search results

Yup. Early on, a guy climbed into a Wee Lassee I built. Heard the crack also. I double layer the bottoms of all my strippers. To me ? the added durability is worth it. As far as hanging the seat from the gunnels ? All but a few Wee Lassee's? I have hung all mine from the gunnels, and never a...

I tilt my hulls as you did. Makes it so much easier to get at the tumblehome, and actually seeing what you are doing. Carpeted saddle stands work great for that. Looks like you have the sanding part down ! Jim

We all differ in our opinions, and I respect that. In my personal experience, and the methods I've used ? Staples are faster, and do a better job, at keeping the strips close to the hull. I have gone mostly stapless on several builds. I always relying on a few staples, in the bilge area, or...

Mine Too ! No faster way, and they keep the strips true to the forms better than clamping. The waiting for the glue to dry, with clamping systems, is too time consuming, for little benefit. All the mold builders use staples, when they make plugs, for production molds. Jim

Yes. The spring clamps I buy are described as 2" size. Oh Yes ! The Other Jim Dodd, came up with a very slick method using bungee cord and two simply cut wood blocks. When Jim and I first found each other ? We had a blast discussing our building methods The Other Jim, does superb work ! I'm...

I found the Bit Nick Schade, uses for bead and coving 3/16 thick strips. This bit is a 3/32" multi coving bit, available from Magnate. Look for #6045 Magnate The beading bit is in my previous post. I hope this isn't too confusing ! The coving bit was harder to find. Jim

Another pic of Dragon's Teeth in action. I hope a better pic. These I painted red. Dragon's teeth.

Those Jimmy clamps are so handy ! Another clamping system, is the "Dragon Teeth". They are used to hold the outwhales to the deck area, without fasteners. Used exclusively when you glue outwhales on. A pic, I hope that gives you enough information, so you can see how they work. Dragon's...

Always nerve racking when you flip that hull. Looks great. Jim

It may look terrible to you now, but once sanded, and varnished. You will have a hard time seeing it. Jim

3/32" beading bit The coving, or flute bit is available. I just lost the link. It's out there, you just need to search a little. Jim

I would go with the 1/4" , unless you can plane them to 3/16," and get the proper bits. I used 1/4" bits, on 3/16" strips for my last two hulls. They worked fine. Yes, the edges were a little ragged, but when I was done sanding the hull ? They were fine. So looking for bits, I found Nick...

I've never seen the Swift seats, until after I built mine, (picture only). What gave me the idea, was, I made a bench, at the wood Shop, using the first half moon cut, from a Ash log. After I built the bench and sat on the curved top ? I was pleased, at how comfortable it was. I made two half...

Almost the very last pic in my Photo Bucket ! Worth every scroll down to find it ! Jim

For some, buckets are fine. To me ? They restrict rotating your body, if say you want to turn and look behind you. They do keep you centered in the canoe. Great for stability reasons. I came up with a seat design, I'm really happy with. The side to side rails, dip down in the middle, keeping...

Yes, all food was in Bear Vaults. He walked right by them, about 10 yds away, never disturbed them at all. Must have swam to the campsite, as Beaver were going crazy, slapping their tails ! that was my first clue something was around. Jim

I hold this site up as the top Canoe Building site ! CanoeCraft forum, had been very good also, but has since gone under. Yes, the diversity is a big plus here! Keep up the fine work guys ! Where else can you find Canoe Building threads ? Jim

Great score on the strips. Oh, if you lived close to me ? I've got some good deals on canoe stuff ! As for the Runs ? Yeah, we've all been down the road to dealing with runs. Timing ! Get them, while the epoxy is still soft. A Carbide paint scraper is your best friend ! Hoping you added...

That is common for the hull, to pull away from the forms at the shearline. I staple it back in place, just very near the edge. I glass over it. Later I pull the staple through the glass. One could use hot melt glue also. Jim

I confess I haven't followed this thread. But Fear is a necessary evil. It keeps our senses sharp. So embrace fear as it keeps us alive. Sorry, if it sounded a little like a Chinese proverb ! Jim