Black_Fly's latest activity

Added some green flakes. Seems like it will hold.

I’m wondering if thickened Gflex is good for patching gouges in Gelcoat boats. The soapy, crumbly nature of the coating is what...

The narrow bow of a tripper like a MNII can create instability without a substantial cargo load. The front paddler is often cramped and...

Is your partner twitchy?

Not a problem in Ohio because the water is so filthy most canoeists wash their canoes right after paddling.

Maybe not so bad. Pay $30/night and put up with a bunch of jabronies at the surrounding sites or pay $300/night and have the place to...

There is an entire group on Facebook dedicated to Vandalism in National Parks. Too danged depressing to join. Check it out.

I couldn't find anything on Northstar's site but, according to this guy on Reddit, it's 50:1.

The instructions also say remove all epoxy repairs. I’ve always made small repairs with epoxy and never have removed it to recoat...

I did the math route. 473ml to a pint. Found old Instructions say 2% MEKP to resin (50:1). That’s 9.5ml from a 22ml tube of hardener...

Not sure but it’s from a north star recoat kit specifying MEKP harderner.

It’s been years since I figured out the amount of hardener to use on this small can of resin. Anyone know?

Not sure where this crack came from, but it looks like it could be from hauling in wind, which I’ve done plenty recently. Any reason to...

yeah, but how are goats in the boat?

Should be an AT robot with that name.