I have the boat, the spray skirt and two of the darndest float bags I have ever seen. They each have a dump valve, a fill valve and a completely raw open edge for about 18 inches on one side.
They are intended to be loaded with soft gear like clothes and sleeping bags, then closed and inflated. What is missing is the closure. Voyageur I believe made the bags. At one time I had a smaller bag that was for carrying day gear that had a similar raw edge.. you rolled it up and then slid a plastic sleeve over it that clamped the rolled over layers.
I was wondering if one inch PVC clear tubing sliced along its length would clamp similarly . Any other suggestions?
They are intended to be loaded with soft gear like clothes and sleeping bags, then closed and inflated. What is missing is the closure. Voyageur I believe made the bags. At one time I had a smaller bag that was for carrying day gear that had a similar raw edge.. you rolled it up and then slid a plastic sleeve over it that clamped the rolled over layers.
I was wondering if one inch PVC clear tubing sliced along its length would clamp similarly . Any other suggestions?